![]() ![]() However, this may not be needed if Apple’s tech support can figure out what the holdup is. ![]() In the worst-case scenario, you will need to bring your computer to an Apple store or send it in for repair. If non of the above methods worked and your Mac still won’t boot properly, then it is time to contact Apple. ![]() You can also revert back to a previous backup with Time Machine or use the Disk Utility, but the best thing is to just reinstall the operating system. Step 3: Click “Options” and follow the onscreen prompts. Keep the two keys held until you reach the Utilities screen. Step 2 (Intel Macs): Press and hold the Command and R keys while turning the computer on. Step 2 (Apple Silicon): Press the power button and hold it until the Utilities window appears on the screen. Step 1: Turn the computer off if it is currently on. This is not ideal, but if your Mac won’t boot, there really isn’t any other choices. From here, you can try to repair a problematic disk drive or, more importantly, reinstall the operating system. Boot to Recovery Modeįinally, you can boot your Mac into Recovery Mode, which is essentially the last option. Now, go ahead and try turning it back on to see if the problem is resolved. Step 4: After properly following the above steps, your Mac should now be turned off. The computer should turn back off if it is turned on in the previous step. Step 3: Next, hold down the power button in addition to the other keys for an additional seven seconds. The computer may turn on while holding, and that is okay. Step 2: Simultaneously hold the Control, Option (left side), and Shift (right side) keys for seven seconds. Step 1: Turn off your Mac if it’s powered on. Check Apple’s full instructions for resetting other computers. Also, note that the process below is for newer Intel Macs with a T2 chip. Keep reading to reset the SMC on an Intel Mac. If you have an older Mac, go ahead and restart it if you haven’t done so already. However, this is usually only a problem with older Intel-based Macs because the newer M1 and M2 computers reset their SMC automatically each time the computer is turned off and on. So if you are having issues with your computer not booting up properly, it could be the culprit. The System Management Controller or SMC is responsible for several things on a Mac, but one of the most important is power management. Step 1: Turn the computer off if it is on. Therefore, if the computer boots into Safe Mode, you will know that there is likely an application that is causing problems at startup. Safe Mode will let the computer boot up with only the necessary programs that it needs to run. Be sure to follow each of the steps in order before moving on to the next method. The first is using Safe Mode, the second is resetting the computer’s SMC, and finally, you can reinstall the operating system using Recovery Mode. There are three primary ways that you can fix a Mac that won’t boot properly. Quick Fixes: What to do when Ventura won’t Boot In this case, you can plug it into a monitor to see if the computer is working properly. Finally, your Mac may have problems with its screen. The most common problem is if the computer tries to start up but never loads, then it is likely in a boot loop. In the event there are no lights or signs of life, then the problem is more likely a glitch or bug. ![]() If there are signs of life, then the computer needs resetting. Make sure that the computer is plugged-in and take notice of whether or not it has power by trying to turn it on. The first thing to check if your Mac running Ventura won’t boot is whether it has power. Quick Fixes: What to do when Ventura won’t Boot. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |